The SafePLATE exchangers with double wall system are intended for the systems where it is crucial to protect media from mixing and quickly detect any possible leak.
The SafePLATE exchangers have been designed for applications requiring high heat exchange efficiency, where it is crucial to prevent working media from mixing in case of internal leakage. Such leakage, though very unlikely, may be the result of corrosion or hydraulic impact in the system.
In such case the specially designed double wall layout and a slot on the side surface of the exchanger leads the leakage outside, which allows for its quick visual detection and undertaking appropriate preventive measures.
- Double wall system – hepls to prevent potential mixing of working media
- Quick detection of internal leakage – leading the leakage outside
- Long-term life span – made of corrosion resistant stainless steel
- High performance and compact size
Double wall layout
facilitates locating a leak and reduces downtime due to system malfunction.
CH and DHW Systems
Selecting a central heating (CH) and domestic hot water (DHW) system is a decisive factor that affects the costs, pollution […]
A division of the energy industry, supplying heat from a heat generating plant or a combined heat and power plant […]
Single-function district heating substation
District heating substations are systems located at the junction of a city’s heating grid and the internal system of a […]
Two-function district heating substation
Heat from a heating grid is transmitted into the system inside a building using a district heating substation.
Residential district heating substation
A residential substation, also called individual apartment substation, is a compact device providing heat to a single apartment.
Renewable energy sources
In the contemporary energy industry, decarbonization has become a global trend, because of ever growing environmental awareness.
Solar panel collectors
Solar panel collectors, also called photovoltaic collectors, are the most common method of using solar power.
Heat exchangers are one of the most important elements of refrigeration systems. They transfer energy from the evaporating refrigerant during […]
The essentials of heat pump operation consist in using thermal energy collected from the natural environment (lower temperature reservoir).
Geothermal energy is one of the renewable energy sources. It comes from rocks, water or soil.
Cooling systems ensure that appropriate thermal comfort is maintained in industrial and commercial facilities.
Local systems are the most common cooling systems. They provide cooling in a single building, e.g. hotel, hospital or office […]
The concept of district cooling becomes ever more popular. Cold is collected through a single, central source instead of local […]
Water and glycol heaters
A heater is a compact device, usually installed between a pre-filter and a ventilation chamber.
The essentials of heat pump operation consist in converting thermal energy collected from the natural environment (lower temperature reservoir) into […]
Ground source heat pump
Ground source heat pumps are the most economical type of heat pumps.
High-power water heat pump
Industrial heat pumps may provide heating and cooling, using energy from different processes.
Re-use of heat (thermal energy) from hot waste water, gases, ventilation or sewage is called heat recovery.
One of the ways to increase the performance of cooling systems is to use heat exchangers as subcoolers.
Brazed plate exchangers may be also used as economizers (regenerative subcoolers) with the aim to additionally cool down the cooling […]
Cooling systems fitted with air-cooled condensing units produce waste energy by dumping condensation energy into ambient air.
In ORC installations, water vapor is replaced with organic media that evaporate in a relatively low temperature (and pressure).
Subcooler with vapor superheating feature
Hot condensate liquid from the condenser may be used for superheating cold vapor from the evaporator through a heat exchanger.
Cooling systems are an indispensable part of installations in supermarkets. With the wide range of products offered in large format […]
Indirect cooling systems are divided into two types of circuits – primary cooling medium circuit and one or two secondary […]
The low-temperature evaporation process requires low pressure.
A part of the economy that handles the manufacturing of products and intermediate products for consumption.
Production of milk involves cooling, pasteurizing, fermenting, drying and storing products in a suitable temperature.
A part of the economy that produces beer on an industrial scale, including breweries, malt-houses, non-alcoholic beverage manufacturing facilities and […]
Beverage manufacturers compete in employing the most modern technologies to increase system performance and optimize costs.
The oil processing industry processes oil crops and makes secondary products, such as margarine or oils.
Oil coolers allow to reduce the quenching, transformer and lubricating oil temperature. They optimize the operation of hydraulic systems based […]
Transport is a set of activities connected with moving persons and goods using the appropriate means of transport.
Oil cooling in CNC machine tools
Tool cooling plays an important role in machining processes. The main function of the coolant during the machining process is […]
Oil cooling in a plastic injection molding machine
Injection molding machines for plastics are equipped with a hydraulic system that must ensure reliable operation throughout the manufacturing cycle.
The chemical industry includes chemical processing, plastics manufacturing, fertilizers manufacturing and the petrochemical industry.