Specification F USA

HVAC

Sanitary engineering handles heating, ventilation and air-conditioning systems.

Single-function district heating substation

District heating substations are systems located at the junction of a city’s heating grid and the internal system of a […]

Two-function district heating substation

Heat from a heating grid is transmitted into the system inside a building using a district heating substation.

Solar panel collectors

Solar panel collectors, also called photovoltaic collectors, are the most common method of using solar power.

Geothermal energy

Geothermal energy is one of the renewable energy sources. It comes from rocks, water or soil.

Local cooling

Local systems are the most common cooling systems. They provide cooling in a single building, e.g. hotel, hospital or office […]

Water and glycol heaters

A heater is a compact device, usually installed between a pre-filter and a ventilation chamber.

Steam systems

Advantages steam heating include the possibility to use smaller heating surfaces in comparison to heating with water and a very […]

Server room cooling

Cooling systems are an important part of network infrastructure, which is decisive for the high availability of an ICT system.

Air conditioning

Air conditioning is a cooling process, in which the air supplied to buildings undergoes a technical treatment that provides a […]

Refrigeration

Heat exchangers are one of the most important elements of refrigeration systems. They transfer energy from the evaporating refrigerant during […]

Subcooler

One of the ways to increase the performance of cooling systems is to use heat exchangers as subcoolers.

Economizer

Brazed plate exchangers may be also used as economizers (regenerative subcoolers) with the aim to additionally cool down the cooling […]

Desuperheater

Cooling systems fitted with air-cooled condensing units produce waste energy by dumping condensation energy into ambient air.

Orc systems

In ORC installations, water vapor is replaced with organic media that evaporate in a relatively low temperature (and pressure).

Subcooler with vapor superheating feature

Hot condensate liquid from the condenser may be used for superheating cold vapor from the evaporator through a heat exchanger.

Indirect system

Indirect cooling systems are divided into two types of circuits – primary cooling medium circuit and one or two secondary […]

Supermarkets

Cooling systems are an indispensable part of installations in supermarkets. With the wide range of products offered in large format […]

Low- and high-pressure regenerative heat exchangers

The world’s conventional power generation industry keeps pushing towards improving the performance of electricity generation. This trend is caused by […]

Beverage manufacturing

Beverage manufacturers compete in employing the most modern technologies to increase system performance and optimize costs.

Oil manufacturing

The oil processing industry processes oil crops and makes secondary products, such as margarine or oils.

Sugar-making

Sugar-making is a part of the food and beverage industry, which produces sugar from sugar cane or sugar beet.

CIP stations

CIP (Clean in place) stations are systems to wash systems and devices that constitute the equipment of industrial plants where […]

Power industry

The modern world depends on electricity. All aspects of life require its supply.

Gas-fired boilers

Closed cooling water coolers

Proper operation of power plants and combined heat and power plants requires constant supply of water.

Cylinder lubricating systems in refrigeration

Steel metallurgy is the industrial activity that consists in smelting various steel alloys.

Oceanarium

An oceanarium is a collection of tanks filled with sea water. It is intended both for breeding ocean and sea […]

Fermentation chambers

Places where organic substances contained in the sewage sludge undergo biological decomposition. The process takes place due to anaerobic methane […]

Oil cooling

Oil coolers allow to reduce the quenching, transformer and lubricating oil temperature. They optimize the operation of hydraulic systems based […]

Quenching oil cooling

Quenching oils are used in heat treatment processing of various iron alloys, mostly steel.

Transformer oil cooling

Transformer oil is a synthetic or mineral oil used as an insulator, also having cooling functions.

Oil cooling in CNC machine tools

Tool cooling plays an important role in machining processes. The main function of the coolant during the machining process is […]

Oil cooling in a plastic injection molding machine

Injection molding machines for plastics are equipped with a hydraulic system that must ensure reliable operation throughout the manufacturing cycle.

Transmission systems cooling

Wind turbines are often equipped with a toothed mechanism (rotational movement transmission system) located between the rotor and the generator.

Chemical industry

The chemical industry includes chemical processing, plastics manufacturing, fertilizers manufacturing and the petrochemical industry.

Petrochemical industry

Petrochemical products are chemical products obtained from crude oil as the result of a refining process. Chemical compounds produced from […]

Dairy

Production of milk involves cooling, pasteurizing, fermenting, drying and storing products in a suitable temperature.

Pool with treated water

Home and public pools function differently, but have one thing in common – water in them must be crystal clear […]

Salt water pool

Salt water pools are facilities using table salt or salt in tablets.

Sewage treatment plants

Complexes consisting of devices and facilities for removing contamination from wastewater and disposal of the sludge resulting from their treatment.

Waste heat recovery

Experts say that by the middle of the century the main source of power for heating buildings will mostly be […]